How to make a castle and a palace - a master class and a photo

Table of contents:

How to make a castle and a palace - a master class and a photo
How to make a castle and a palace - a master class and a photo
Anonim

See how to make a lock out of cardboard, paper, or plasticine. Pay attention to how to make a princess palace out of lace as well as candy.

During school holidays, children will need entertainment. Show them how to make a castle with their own hands, a palace to play with. They can make a small structure to launch dolls here or a grandiose structure to play with at home or outdoors in the country.

How to make a cardboard lock?

Take:

  • corrugated cardboard or a large box, for example, from under a refrigerator;
  • scissors;
  • stationery knife;
  • Scotch;
  • glue;
  • paints.

You can make a castle out of cardboard so that there are only walls. Take two sheets of this material and, using a stencil or by hand, apply here such elements as a Christmas tree, clouds, snowflakes. It will be seen that this is an outer wall and it is snowing.

Blank cardboard lock
Blank cardboard lock

To make a stencil drawing, lay it on cardboard, then apply paint with a sponge or foam rubber.

Then you will need to make slots for windows and doors. To do this, use a utility knife. Decorate the tops of the wall with scissors. There can be various towers and brickwork. Now make a notch in the middle from the bottom to the center on one rectangle of the cardboard, and from the top to the middle on the other. Connect these two elements crosswise. You will have four open walls. If there are several children, they can even play hide and seek here. The templates provided will help you craft this product.

Padlock pattern
Padlock pattern

Here's how to make a cardboard lock using just two large sheets of paper. And if you need to make such a structure for dolls, a small box will do. Draw square windows on it, and cut out on top so that you get a loophole. Cut a ladder out of the roof of the cardboard box. To allow toy characters to go inside, make a sliding door. To do this, cut it out only from the top and from the sides, and then you will lift it with the two threads glued here.

Cardboard lock
Cardboard lock

If you wish, you can then paint the outside of these walls with the children to make them look like masonry. You can cut out knightly coats of arms to attach them as well. It will be interesting for a child to play with such a castle.

The child decorates the castle
The child decorates the castle

If you wish, you can glue the brick patterned duct tape here to do this.

Cardboard lock
Cardboard lock

If you connect the coats of arms with a string, you can hang them on the top of the structure. Print out the presented heraldry elements to cut and use.

Coats of arms for the castle
Coats of arms for the castle

You can make a lock consisting of 2 boxes. At the square, cut off the top, arrange the place of the cut, make windows. Take the second box, which is narrower, put it in the first, also pre-filling it.

Two-box lock
Two-box lock

You can take a white packing box. It is brown inside. When you shape the elements of this structure, you will get a beautiful two-tone color.

White lock
White lock

The castle with towers will look beautiful. To do this, you need to take cardboard sheets, cut them into rectangles from above. Roll up tubes from other sheets to form the base of the tower. Cones should be made from other remnants of this material. Flip them over and secure them to rolled items.

Castle with towers
Castle with towers

Draw brickwork on yellow paper, cut and glue it in some places. Here's how to make a cardboard lock.

You can craft a small one using junk material.

Read more about making toys, cardboard boxes

How to make a toilet paper roll lock?

Take:

  • toilet paper rolls;
  • red paper;
  • scissors;
  • pencil;
  • a sleeve from a wide adhesive tape;
  • white paper;
  • silver cardboard;
  • white cardboard;
  • felt-tip pens;
  • little toys Kinder surprises;
  • glue stick;
  • scissors.

To make a cardboard lock, first prepare the necessary ones. It is necessary to cut three circles out of red paper, cut the napkin into squares with sides of 2 cm. Make the same blanks from white paper.

Blanks for making a castle
Blanks for making a castle

To make the roofs for the tower, fold the red circles in half and again in half, cut on one side. Now bring this edge to the adjacent one and glue it.

Cutting out the covers for the tower
Cutting out the covers for the tower

Here's how to make a paper lock next.

We glue the covers for the tower
We glue the covers for the tower

Take the grommet, place the Kinder surprise toy next to it and see how high the entrance should be. Also define its width. Draw this door with a pencil and cut it out.

Toilet rolls
Toilet rolls

Take the sheets of cardboard, fold back their tops by a quarter and draw stripes here to put the toy here and determine the dimensions of the entrance.

Lock paper blanks
Lock paper blanks

Draw them and cut them out. With a black felt-tip pen, draw wavy lines on the red roofs to make them look like tiles.

How to draw wavy lines on the lock blanks
How to draw wavy lines on the lock blanks

Now glue two squares on the opposite tops of the grommet. Use them to glue the tower here. Do the same with the rest of the blanks.

We glue towers for the castle
We glue towers for the castle

Take squares cut from a sponge napkin and glue them so that they turn into tower windows.

Three towers for the castle
Three towers for the castle

Draw crosses here with a felt-tip pen to help you understand that these are windows. Also, using this tool, paint a characteristic pattern on the door.

Finishing the windows and doors for the castle
Finishing the windows and doors for the castle

Use a clerical knife on each sleeve to make cuts from the bottom to the middle. Now insert the prepared walls into them.

We make cuts in the bushings and assemble the lock
We make cuts in the bushings and assemble the lock

Now the child will play with pleasure, will come up with entertainment, combining the past and the present. If he wants to make a gate for a car, then let him take two bushings and cut them from one side from top to bottom. You also need to use a rectangle of silver cardboard. Fold it in half and cut the top so that it becomes rounded.

Cardboard blanks
Cardboard blanks

And here's how to make a cardboard lock further. Insert this silver gate into the slots of the bushings. They will be rising, because the child will be able to lift this silvery element so that the car will drive inside.

Cutting out the gate for the castle
Cutting out the gate for the castle

Entertainment for little kids is done literally in an hour. You will be convinced of this now.

How to make a palace with your own hands - a master class and a photo

Since childhood, girls have dreamed of being princesses, and they will surely like such a beautiful house.

DIY palace
DIY palace

To make it, you will need:

  • large cardboard box;
  • scissors;
  • stationery knife;
  • adhesive tape.

You can use just such a box by making an entrance slot on the side, and a window on the other. To make the window openable, only cut it on three sides.

Child near a cardboard box
Child near a cardboard box

Now you need to cover it with self-adhesive film. If you do not have a self-adhesive film, then use washable or regular wallpaper with a brick pattern, decorated with flowers.

Glue a film or wallpaper, decorate with strips of paper the places of the window and entrance.

We glue the box with wallpaper
We glue the box with wallpaper

Here's how to make a palace even more chic, you can cut a crown out of cardboard, glue it over and attach it up as a roof and decorative element.

The palace will come in handy when you want to arrange a birthday party for your daughter. The invited girlfriends will absolutely love it. To do this, you need to take a cardboard box, disassemble it and cut it out so that you get the walls of this structure. Glue flags, brickwork on top. Cover the palace with pink paper, attach various other elements here that will enhance the beauty of this building.

Children dance
Children dance

And you can decorate the windows in such a way as to draw characters from your favorite books and cartoons of children.

Children near the paper palace
Children near the paper palace

How to make a plasticine castle with your own hands?

DIY plasticine castle
DIY plasticine castle

Take:

  • two plastic bottles and the top of the thirds;
  • plasticine;
  • knife;
  • plastic jar lid;
  • auxiliary tools.
Plasticine lock blanks
Plasticine lock blanks

First, you need to mold a lot of plasticine bricks. To do this, it is most convenient to take the bars already in the set and cut them with a plastic knife. Now place the bottle on the base and start glueing it with the created elements.

Materials for a plasticine castle
Materials for a plasticine castle

You also need to cut out the top of this container, decorate it with plasticine circles so that they turn into shingles. Make the second tower in the same way, but without a roof. Make a small balcony out of plasticine and place a princess figurine from the same material on top. Don't forget to make the windows. Place the roof on top of the first bottle. Connect these two buildings with a plasticine fence.

Snow Maiden Palace - master class and photo

You can make a picture of lace together with your child for the New Year.

Snow Maiden Palace
Snow Maiden Palace

Take:

  • a sheet of red cardboard;
  • laces of various widths;
  • scissors;
  • sequins;
  • glue.

The first tape of lace must be cut so that it is glued to the bottom of the sheet of cardboard, placing it horizontally. Then you need to get two segments that are attached here vertically. On top, with a small gap, glue two rectangles, but smaller.

Blanks for the palace
Blanks for the palace

Then you need to connect the two pillars with a lace ribbon, the edges of which are folded and ironed at an angle. You will glue the smaller sewing strip on top of the two small rectangles.

Lace blanks for the lock
Lace blanks for the lock

Cut a 12 cm long strip from the lace ribbon, glue it on top of this palace. It remains to attach the sequins in the form of snowflakes to decorate the work.

Lace Ribbon Lock
Lace Ribbon Lock

The Snow Maiden can live in another castle. Or the child will put the princess here. This structure is also created using lace. Here's what you need to make a palace:

  • Whatman, one or two;
  • scissors;
  • glue;
  • lace;
  • cotton wool;
  • the cloth;
  • pen or felt-tip pen.

Crafting workshop:

  1. Lay the drawing paper in front of you, make slits on top so that you can see it is masonry. Now, with a pencil, draw semicircular windows at the top. Glue the fabric here. But you can make stained glass windows, for this the child paint them. Now you need to roll several rolls from strips of white paper and frame the windows below and on the side with them.
  2. Show your daughter or son how to twist pieces of cotton wool between your palms so that they turn into uneven snowballs. They need to be glued on top of the windows, they can be decorated at the bottom.
  3. Cut out two rectangles from the second Whatman paper, roll each one up and glue the sidewalls. Also, cut out a circle from this material, cut out its sector, Bring the opposite edges one over the other and glue it. You will get the roof of the tower. Decorate this roof with lace. Also, using round lace or sewing, make a watch, put numbers on it and draw arrows.

Paint on the dial with a regular ballpoint pen rather than a gel pen to keep the elements from spreading onto the fabric.

Paper lock
Paper lock

Here's how to make a castle out of paper, in which the Snow Maiden, the Princess can live, or it will become the habitat of Cinderella.

And if you want to make an edible gift, then lay it out in the form of a princess castle. This can be presented to a girl or woman for any holiday.

How to make a candy castle?

Candy castle
Candy castle

To construct one, take:

  • 5 packs of Disney Prinses chocolates;
  • 17 candies "Nut";
  • 3 chocolate coins;
  • 2 Dolci chocolates;
  • 3 sheets of A4 cardboard;
  • a strip of insulation 2 cm thick measuring 60 by 30 cm;
  • green sisal;
  • copper thread;
  • green film;
  • purple foil;
  • thin pink mesh;
  • green mesh;
  • green film;
  • skewers;
  • toothpicks;
  • beads.

Use Disney candy to make the following items. Some candies need to be tied with tails of 4, and others in 5 pieces, so that as a result they form a ring. Use copper thread when doing this.

Candy blanks
Candy blanks

Then glue the ends with a glue gun, turn them out.

Glue the tips of the candy wrappers
Glue the tips of the candy wrappers

Now take cardboard and cut out 2 blanks measuring 13.5 by 14 cm for a small tower, and one piece for a large 17.5 by 20 cm. Roll them into tubes, fix by taking a stapler.

Twisting the paper tubes for the tower
Twisting the paper tubes for the tower

Now on these blanks you need to put on the created circles of candies - 6 pieces with a diameter of 4 cm and 3 pieces with a diameter of 5 cm.

Candy blanks
Candy blanks

Circles need to be cut out of the insulation and glued into cardboard towers on one side and on the other.

Forming towers for the castle
Forming towers for the castle

Take mesh, cardboard, foil and cut out a quarter circle with a radius of 10 cm, two pieces. You will also need one piece of a quarter circle with a radius of 12 cm. Twist the cardboard cones, fix them with a stapler. Attach the foil and mesh on top. Trim the tops of these shapes a little.

Cut 12 cm squares out of foil. You will need 13 pieces. They will need to wrap the "Nut" sweets, and then fix them on the skewers.

Foil wrapped candies
Foil wrapped candies

Decorate the rooftops of the turrets with these sweets. Cut a 35 x 23 cm rectangle out of the insulation to make the base on which you will place the castle buildings. On one side, cover it with green foil, on the other, attach sisal of the same color.

Cut squares from green foil with sides of 7.5 cm. You will need 16 pieces. Make 11 pounds of toothpick halves. And 5 pounds need to be made on pre-decorated sweets. Cut out squares with sides of 7.5 cm from the green grid. You will also need 12 pieces. Make funicles of them too.

Step-by-step instructions for preparing parts
Step-by-step instructions for preparing parts

Cut princess portraits from Disney Prinses candy boxes to resemble windows. Attach these blanks to foil and cardboard and cut out the same parts, but a little larger. Glue the windows, glue them to the tower. Decorate the surrounding space with candies in sparkling papers, decorated with green candy wrappers.

Candy castle
Candy castle

To also decorate the space with a tree, cut a square with a side of 18 cm from the film and wrap a kinder surprise with it. Attach the blank on a large skewer, decorate with beads. Take three "Nut" candies and tie their ponytails. Fix with toothpicks. On one side of the lock, fix it with a tree, near which attach the "Nut" candy. We decorate here with light green and green mushrooms, between which you glue chocolate coins. And attach the beads in front of the lock.

The castle is decorated with a green tree
The castle is decorated with a green tree

Here's how to make a castle out of cardboard, paper, make a palace out of plasticine, lace, or make an edible one. Observe how others make a cardboard lock. Perhaps you also want to create such a medieval building.

And how to make a lock out of paper will clarify the second plot.

Recommended: