See how to make crunchy slime. Such a toy crunches cool thanks to the addition of foam balls or ball plasticine here.
How pleasant it is to crunch anti-stress! To do this, you need to know how to make crunch slime. This crunchy slime is an excellent anti-stress and has an endless variety of options to play with.
How to choose a crunchy slime glue?
Before tackling this fun process, prepare a suitable glue. You can use stationery, silicate glue, or PVA. If the latter option works, then see which white PVA adhesives are best used. It:
- "K 19";
- "365 days";
- "Ray";
- "TO";
- "Contact";
- Erich Krause.
If you use PVA, then the slime will be opaque. And if you take the stationery and the corresponding ingredients, you get a transparent slime. Then you need to add various components here, in the end add foam balls and knead this mass with pleasure.
Look at recipes for crunchy slimes, choose the most acceptable one for yourself.
How to make a crunchy slime with beads?
To create a fun-to-play mass, take:
- 260 ml of silicate glue;
- 100 g of small beads;
- 4 tbsp. l. washing gel Persil.
Pour the glue into a container, add the gel to it and begin to knead thoroughly to make a dense mucus. Then start kneading it in your palms until it starts to come off them.
After that, place the slime on the work surface, pour out the beads and begin to knead to get a homogeneous mass with these inclusions. Such crunchy slime will crunch by pressing on many pieces of small beads. Besides, it turns out to be quite cute.
And if you want to use foam balls as a crispy component, then see how to make a slime with them.
Homemade crunchy slime recipe with foam balls
Take:
- 100 g of silicate glue;
- 90 g of lukewarm water;
- 10 tsp soda;
- a little dye;
- 50 ml of liquid for lenses;
- foam balls.
After you pour the glue into the container, add soda here and mix well. Now add borax and after mixing the mass with this component, add a thickener little by little. Here, the lens fluid acts as it.
Add color if desired and stir again. After the slime thickens, put it in a bowl of balls and start playing with it so that the balls are evenly distributed in the slime.
You can try to repeat after the heroine of the final video and make a crunch slime from 2 liters of glue. Then you will need about 10 packs of styrofoam balls. But the output will be a huge slime, which is useful for a variety of games. But you need to store it, like other similar products, in a spacious plastic container with a tight-fitting lid.
The next crunchy slime recipe is no less interesting. If you want to make fluffy hand gum, then use it.
Take:
- 150 ml of PVA glue;
- 1 tbsp. l. boric acid;
- 150 ml shaving foam;
- 0, 5 tbsp. l. soda;
- optional dye;
related accessories.
Follow the instructions below:
- Take a deep container and place the glue in it. Add foam and combine these components. At this stage, you need to add dye as well. When the mixture becomes homogeneous as a result of stirring, begin to thicken it by adding boric acid. The easiest way is to take a pharmacy bottle of liquid solution and add literally two or three drops.
- If the mass has thickened, stop there. If not, then add a little more boric acid. Then add three pinches of salt here and stir.
- Then remember the crunch slime for about 20 minutes. It will become airy, air bubbles will be added to its composition, thanks to this, a crackling sound will be heard when the slime is pressed. That's what you need for crispy slimes.
But if you wish, you can also add some foam balls here for the familiar crunch. They come in different diameters. Experiment, make different variations. And you will understand which crunchy slime you liked the most.
You can also use ball plasticine as a component that emits a sound when pressed. See how then you need to create this slime.
Homemade crunchy slime with boric acid
Take:
- thick stationery glue in the amount of 100 to 125 ml;
- boric acid in the amount of 3 tbsp. l.;
- a little soda;
- ball plasticine.
To make crunch slime at home, place a container in front of you and squeeze out the glue here. Then add boric acid gradually and stir. Then you will need to add a pinch of salt.
After mixing this substance, add or pour a little dye here. When this mass becomes homogeneous, then put the ball plasticine here and mix too.
This is a very good crunchy slime recipe because you can play with this hand gum right away without putting it in the fridge.
How to make crunch slime with polystyrene balls?
If you like liquid starch slimes, then check out how to create crunchy slimes with this ingredient.
Take:
- transparent office glue;
- liquid starch;
- polystyrene balls.
First, pour half a glass of glue into the container. If you want to add color, do so now. Stir the contents of the pot.
Now add half a glass of liquid starch to the same container, mix. To make the slime denser, start stirring it thoroughly with your hands.
If after 20 minutes the slime still sticks to the palms and is too liquid, then add a little more starch and repeat the kneading procedure.
But do not add a lot of starch, otherwise the slime will become too hard. When you get the consistency you want, the slime will not stick to your hands and to the bowl.
Then you put it in a bowl, in which the balls are poured. Begin to knead so that they are evenly distributed over this jelly-like substance. Then leave your creation for half an hour to rest. After that, the crispy slime is completely ready, you can play with it, and then put it in the refrigerator for storage.
And it can be stored for up to a month. But at the same time, you need to try to play with it on a clean surface, with clean hands, so that the slime does not get dirty.
Another interesting recipe involves the use of hygiene products. Check it out.
Recipe for crunchy slime with tetraborate at home
Take:
- 400 g PVA;
- 2 tbsp. l. shower gel;
- 4 tbsp. l. water;
- 1 tbsp. l. cream;
- dye;
- 1 tsp toothpaste;
- tetraborate or other activator;
- polystyrene balls.
Take a bowl and put some glue here. Then add water and stir. After that, cream, shower gel and toothpaste are sent here. After thorough mixing, the dye is added and mixed again.
At the end of this process, add the tetraborate. When, as a result of its introduction and mixing, you get a thick slime, then you can add polystyrene balls here.
Here's a crispy slime. Previously, you can divide it into several parts, add a certain dye to each. Then you will have several multi-colored slimes.
Here's how to make crunchy slimes to become your favorite toys. And since there are many recipes for such slimes, you will periodically try new ones, so this hand gum will never get bored.
It is very pleasant to make it, but it is no less interesting to watch how others create slimes. Watch the video we promised to show you how to make a high volume crunchy slime.
And how to make a crispy slime from ball plasticine, it will become clear from the 2nd plot.
