If you do not have a pharmacy drug, then see how to make slime without sodium tetraborate from shampoo, toothpaste, liquid soap, flour, and even salt and sugar.
This pharmaceutical preparation is far from always at hand. See how to make slime without tetraborate, from the available ingredients, so that it still turns out the desired consistency and pleases you.
How to make a slime without tetraborate with flour?
Such a product is almost always at hand. But even if there is no flour, you can easily replace it with starch. This slime is quite safe, as it does not contain harmful ingredients.
Take:
- thick shower gel;
- flour;
- dye.
Add enough flour to the gel so that the proportions of the two substances are the same. Now send the dye here and mix.
It is better to add a dye to this type of slime, otherwise it will turn out cloudy.
To make the slime without sodium tetraborate softer and more elastic, you can add a little thick cream to it. Then first mix the gel with this component, and then add the flour, stirring so that there are no lumps. And instead of gel, you can use liquid soap.
As you can see, sodium tetraborate-free slime can be made from a wide variety of ingredients that are currently on hand.
How to make slime without tetraborate - two-ingredient recipe
This easy recipe only requires soda and PVA glue. First, put the glue in a suitable container, now you need to add soda one spoon at a time until you get a mass of the desired consistency and density. Then knead it with your hands.
If you want to get a transparent slime, then add silicate as a glue.
How to make homemade tetraborate-free slime with shaving foam?
This recipe will also need soda. Here is a complete list of ingredients:
- soda;
- shaving foam;
- PVA glue;
- dye.
Take a bowl and squeeze out the shaving foam. Now add a bottle of glue and stir. If you want to make a colored slime, then add the dye and stir. After that, slowly pour in the baking soda. Stir in these ingredients, wait a little, then, if necessary, also add baking soda and stir again.
You can do without soda if you take PVA-K glue from Kiphim or similar. Since some adhesives, when mixed with soda, already begin to thicken and form a slime-like mass.
Homemade slime without tetraborate with Fairy
This detergent helps not only in the fight for the cleanliness of dishes, but also helps to make slime without tetraborate.
But first, prepare a baking soda solution. To do this, you need to take 100 g of warm or hot water and add 2 tsp here. soda. Stir. This soda solution can also be useful for making slimes for other recipes.
Now pour 2 tablespoons of Fairy into a suitable container and add the baking soda solution. Pour in a little, stir well, so that the mass begins to thicken. If this does not happen, then you need to pour in a little more soda solution.
How to make slime without tetraborate - recipe with Persil
This detergent will also help make slimes without sodium tetraborate.
But you can take not only Persil, but also Pervol. Pour a bottle of PVA glue into a container, put two tablespoons of any of these products here. Or add two capsules of this detergent. Stir until the slime thickens. It will receive with a beautiful, shiny surface.
You can make this hand gum in a different recipe. To do this, you need to pour a glass of warm water into a bowl, add the gel here and stir so that it completely dissolves. After that, in another bowl, dilute the glue with paint to get a beautiful substance. Then pour this adhesive solution into the prepared washing gel. Stir. Excess water can be drained off. Then knead the slime with your hands.
Homemade slime without shampoo tetraborate
This is a unique recipe that only requires a thick shampoo. Excess liquid must be removed from it so that a viscous mass remains. To achieve this result, pour the shampoo into a container, place it in a pot of water. Put on fire. In such a steam bath, the water from the shampoo will gradually evaporate, it will become thicker. But you will need to cool it first so that you can knead it later.
How to make slime without tetraborate from toothpaste?
Here you will also need a few ingredients to make a slime without sodium tetraborate. It will be enough to add toothpaste to the glue, mix thoroughly, and you will get an excellent slime. You can add a little flavor to it to kill the mint scent if you don't like it.
Now put the slime in a container, close the container and leave it for 2 days. After this time, it will ripen, you can use this tool.
How to make slime without tetraborate - a quick recipe
You will get it in just 5 minutes if you use polymer construction glue. First squeeze this product into a container, then add some water here and stir with a spoon. After that, you will need to knead it with your hands to get a quick slime.
Homemade slime without tetraborate from toothpaste, flour, liquid soap
Take 1 tbsp. l. liquid soap and toothpaste, mix thoroughly and add 5 tablespoons of flour. If you wish you had a liquid slime, then add a little less flour. And this amount will allow him to keep his shape well.
Slime recipe without tetraborate with powdered sugar
This preservative will help the slime thicken. Take:
- 4 tbsp. l. liquid soap;
- 4 tbsp. l. thick shampoo;
- icing sugar.
Mix soap and shampoo. Add dye if desired. Now put in 2 teaspoons of powdered sugar, stir. Leave the slime in the room for a couple of hours, then put it in the freezer for another 30 minutes.
But not only sugar, salt will also help make slime without tetraborate.
How to make slime without tetraborate: recipe with salt
Mix thick shampoo with shaving foam. Add a pinch of salt here. After mixing, refrigerate for half an hour. You will have fluffy fluffy slime without tetraborate. If you also want to know a recipe where you do not need to use sodium tetraborate and glue, then see the next recipe.
Homemade slime without salt and shampoo tetraborate
To do this, you only need 2 of these ingredients. In the thick shampoo, you add a little salt and knead to thicken the mass. Then place it in the refrigerator for two hours. Then you can play.
How to make a slime without tetraborate from gelatin and plasticine?
From these ingredients, you can also make a slime without tetraborate. Soda and salt will act as a thickener here.
- Take 1 tbsp. l. gelatin, place it in a glass of cold water. If the recipe requires it, then first the gelatin must be allowed to stand for 40 minutes in water. But you can immediately put it on to heat, if it is written in the recipe.
- Bring the gelatin to a hot state to dissolve. But before boiling, do not leave it on the fire, remove it earlier.
- Put a light plasticine in hot water and stir to dissolve the plasticine. Add preheated gelatin here and stir. You will have an interesting slime.
Homemade slime without tetraborate from kinetic sand
Take:
- 3 tbsp. l. starch;
- 100 ml of PVA glue;
- 2 tbsp. l. Persila;
- 2 tbsp. l. kinetic sand.
To make slime without tetraborate using this recipe, combine the gel with glue. After stirring these ingredients, add the starch and stir again.
It remains to pour the sand. If you wish, first sprinkle it on a flat surface, and then start kneading the slime here. You will get an interesting slime, which is so pleasant to wrinkle in your hands.
Here's how to make slime without tetraborate. As always, you can watch the process of making such a slime by turning on video players with prepared videos.
First, you will see a story that shows how to make a sodium tetraborate-free slime with shampoo and toothpaste. For such a slime, only these two components are needed.
And the second video will teach you how to make slime without tetraborate and without glue.
