Iceberg slime is so named because after some time, a crispy crust similar to ice forms on top of this slime. For you - four recipes for preparing this anti-stress.
The iceberg slime has a crispy crust on top, which is so pleasant to press on. Therefore, this slime is named that way. Below is a more delicate substance. You can make the surface look like a painting, and then make adjustments with your fingers by clicking here.
How to make iceberg slime - a classic recipe
Check out this classic recipe. Ingredients are easy for him to purchase. Take:
- shaving foam;
- PVA glue;
- dye;
- sodium tetraborate;
- capacity of the required format;
- mixing paddle.
Manufacturing instruction:
- Put glue and foam in a 1: 3 ratio, add a little dye.
- Now thicken this mass with sodium tetraborate. Start literally with 3 drops, and then, if necessary, add quite a bit of this substance, stir and watch the result.
- After that, place the slime in a suitable container and place it where no one will wiggle the slime.
- If you make this hand gum in the evening, it should have a crust on top in the morning. If this does not happen, then leave the slime in this form for a while. And in the evening, your creation should make a crunch when you touch it.
Try to make a slime from several flowers, then lay out tree trunks on the surface, and from pink? flowers. Or, after the upper part has hardened, simply paint on it with paints, gently brushing with a damp brush. Then you can then make your own corrections here with your hands.
You can make another slime. For it, you need to take some of the ingredients from the top recipe and add a few others.
Iceberg slime recipe with cornstarch
Take:
- a can of shaving foam;
- PVA glue;
- borax;
- corn starch;
- dyes.
Manufacturing instruction:
- Place the foam and glue in a bowl. Keep in mind these ingredients will decrease in size when mixed. Therefore, you need to put more of them than the finished slime will then be.
- Borax acts here as a thickener for slime. Add this substance and stir the mixture. Do this first with a spatula and then with your hands on the table.
- Divide the slime into several parts, add a little color to each and stir. You will have a colorful iceberg slime. But if you wish, use one color, for example blue.
- Remove this container for 4 days to a place where no one will disturb this slime. Then you can, after this time, crunch its crust with pleasure and play plenty with this anti-stress.
Iceberg foam slime recipe
To make such a slime, take:
- hair styling foam;
- shaving foam;
- soda;
- PVA glue;
- baby powder;
- dry dye;
- liquid for lenses.
First, pour the bottle of glue into a suitable bowl. Now squeeze the contents of half a can of shaving foam and styling foam here. If there is not enough shaving foam, then add more of this component. Add 2 tbsp. l. baby powder and a pinch of baking soda.
After stirring this mixture, add a little lens liquid. You will need about 2 tablespoons. Then the slime will begin to thicken. To make the iceberg slime further, divide the resulting mass into two parts. Leave one white, and add the dye of the desired color to the other.
Now take a suitable bowl, put a colored slime down and on the sides, place white on top, evenly distributing it. Remove for 3 days in a dark place, after which a pleasant soft crust forms on top of the iceberg of the slime. Now you can play with it to your heart's content.
How to make an iceberg slime with PVA glue at home?
This recipe will also be useful to you, especially since few components are needed here. Take:
- PVA glue;
- shaving foam;
- sodium tetraborate.
Depending on how much you want your slime iceberg to be, you will need that much glue. It is best to take Domino PVA glue. Luch glue is not suitable for this slime recipe, as it is very liquid for an iceberg.
Now put a bottle of glue in a suitable container, send the foam to it. It will take about half a bottle. But you can take a little more foam. Stir the mass. Then start adding the thickener in small portions. When the thickness of the slime is satisfied, knead it, leave it motionless for a couple of days. After that, an ice-like crust forms on top. Therefore, you can pre-paint your creation blue to make it seem like it is frozen water.
Here's how to make an iceberg slime. Watch the process of making it, it's so exciting. The first video describes how to make a tricolor iceberg slime with shaving foam.
In the second plot, it is clearly shown how to make such a slime so that it is multi-colored, has various decorations in its composition and looks like a cake.
