Fluffy slime turns out to be tender, lush and airy. The article describes how to create such a mass with glue, without it, with a thickener, toothpaste and other components.
This slime is a wonderful toy. At the same time, it looks like a light cloud, but does not tear, it stretches well. Check out the instructions, recipes to help you create this unique hand gum.
A simple recipe for fluffy slime at home
Take:
- 3-4 cups of shaving foam;
- food coloring;
- half a glass of white glue;
- half a teaspoon of baking soda;
- 1 tbsp. l. sodium tetraborate;
- scapula;
- bowl.
First squeeze the froth into a bowl, then add the amount of food coloring as instructed and stir. After that, send white glue to this container and work with a spatula again.
In this case, the dye was added in such an amount that the finished consistency turned out to be pink. It is a delicate and charming color.
Now pour soda here and mix again. The last ingredient is sodium tetraborate. Add it and actively begin to beat with a spoon. In this case, the mass will begin to thicken, the slime will look like a light rubber substance.
Here's how to make fluffy slime at home next. After kneading with a spatula, continue to do it with your hands. If after 5 minutes of these manipulations the fluffy still sticks to the palms, then you need to add a little more shaving foam. You can also add a little sodium tetraborate, which is an activator.
To prevent the slime from sticking to your palms, drip quite a bit of tetraborate into your palm before kneading it.
How to make foam slime?
The second recipe also involves the inclusion of these products. After all, the shaving foam itself is light airy, so the slime will turn out to be gentle too. Take:
- a couple of glasses of white glue;
- sodium tetraborate;
- shaving foam;
- 250 ml of water;
- some lens fluid;
- for decoration ? balls, sparkles, dye.
If you are using borax, first prepare a solution from it. To do this, take an incomplete teaspoon of this powder, pour it into 50 g of hot water. Stir well. Add two tablespoons of contact lens solution and work with a spatula as well.
Add a glass of water and glue to another bowl, stir. After that, it's time to mix the food coloring of the desired color here.
When doing this, also work with a spoon or spatula. Now the creative process begins. After all, you will add sparkles, balls and also mix this mass.
Here's how to make fluffy foam slime next. You will need to add this main ingredient. Take a cup, you will need eight such cups of foam for a given amount of ingredients.
Add fictitious liquid ingredients here and mix again.
Different brands of glue may require a different amount, in this case the craftswoman took Elmer's glue and used two cups for the given proportions. If you need the slime to be harder, then add a little more saline solution. Stir.
If you don't have shaving foam on hand, then we suggest making a slime without this component. Take a look at the following unique recipe.
How to make a fluffy slime without shaving foam?
Take:
- 6 tbsp. l. bath foam;
- 1 glass of PVA glue;
- 2 tbsp. l. lens fluids;
- 1 tsp soda;
- if desired, flavor and color.
Since this is a slime without shaving foam, bath foam will add splendor to it. But take one where there is laureth sulfate, and its amount is considerable. It is easy to determine, the closer this component is to the beginning of the list, the greater its amount.
- Pour water into a spacious basin and add foam here. Take these ingredients in equal amounts. Now whisk this substance with a sponge.
- If you don't have bubble bath, then replace it with shampoo, shower gel, or liquid soap.
- The next step is to add PVA glue and dye.
- When you mix it all thoroughly, then add the baking soda first, and after stirring it, add the lens liquid. The mass will begin to thicken, knead it. To prevent it from sticking to your hands, soak them in lens fluid.
You can also make fluffy slime without tetraborate and shaving foam.
If you add a few dyes, you end up with a multi-colored substance. Mix it well to get one interesting color, or leave the colors unmixed.
You can also make a fluffy slime without glue. You can use a detergent like Persil as it.
How to make fluffy slime without glue at home?
If you want to get a transparent slime, then take:
- 30-60 g of Persil gel;
- 130 g of clear office glue;
- optional ? flavoring.
Manufacturing instruction:
- If you want you to have a transparent slime with decorations, then you can add balls, sparkles here. They need to be inserted into the glue. And if you don't want to, then put the glue in a suitable non-food bowl and add a minimum amount of persil here first, stir if the mass has not become thicker, then pour in the same amount of persil.
- At the final stage, the slime is kneaded in the hands for about 10 minutes, after which you can play with pleasure.
If you modify this recipe, then you add Arco shaving foam or similar here.
Take:
- 1 bottle of clear glue
- 2 tbsp. l. Persil detergents;
- shaving foam Arco.
If you choose Persil, then it is better to take a lavender fragrance designed for washing colored items.
- Dispense shaving cream into a suitable container. Start mixing glue in here. If you want the airy slime to turn out to be colored, add dye. If you want it not to change its color too much, then immediately pour in the detergent. Now mix these ingredients, and then you can play with the hand gum.
- Be careful with these chemicals. If you have an unpleasant sensation in your palms, they turn red, then wash your hands, lubricate with cream and do not use this fluffy slime.
- Then you can make a light shampoo-based slime. This is a more gentle remedy. The chewing gum for the hands will also turn out to be airy, because it will contain shampoo. But you can replace it, for example, with liquid soap.
- Start by adding 2 tablespoons of liquid soap or shampoo to the container. If you want the slime to be colored, then add dyes at this stage. When you mix these two ingredients, start adding a little starch and stirring as well. First add one tablespoon, if this is not enough, then add more.
If your fluffy shampoo slime is too thick, add a little more of this shampoo wash. You can also soften the resulting mass by adding some liquid skin oil or hand cream. Now mash the slime with ease, it will turn out not only airy, but also tender.
If this slime is not dense enough, place the container with it for half a day in the refrigerator. Or add just under one teaspoon of baking soda.
This glue-free fluffy slime is useful for those who are allergic to this component.
How to make fluffy slime from shampoo?
This is another recipe for this shampoo. Ordinary salt will act as a thickener. And the following ingredients are probably in a family where there are female and male representatives. Take:
- shampoo;
- shaving foam;
- salt.
First put the shampoo in a container, now start adding foam to make a mass that is pleasant to the touch. Finish with a little salt and stir. In this case, the slime will begin to thicken. If it doesn't, then add some more salt and stir.
How to make fluffy slime from toothpaste?
Based on this component, you can make a slime that will be gentle and very pleasant to the touch. You will need:
- a glass of Gillette shaving foam;
- 30 Art. l. silicate glue;
- a tube of toothpaste;
- baking soda;
- tetraborate.
First, squeeze the paste into a container. Then add the Gillette foam here and start mixing the ingredients with a pastry whisk. Then glue is added to the mass, and it is whipped again. It remains to add a little tetraborate, 2 pinches of soda and finish mixing.
Fluffy slime recipe without glue and tetraborate
This is an interesting option for making a slime based on soft plasticine. Take:
- light plasticine;
- shower gel;
- lens solution;
- shaving foam.
To make a fluffy slime according to this recipe, you first need to send the shower gel into the container, then add the mashed light plasticine and mix everything with a spatula. Next comes the shaving foam, after mixing it, add the lens solution and knead the mass.
How to make fluffy slime without shaving foam with Luch glue
This interesting option will require:
- 4 tbsp. l. starch;
- 50-100 g of Luch PVA glue;
- 4 tbsp. l. shampoo;
- 1 tsp body creams;
- spray Teymurov;
- 1 tsp tablespoons of soda.
Manufacturing instruction:
- Squeeze 50 g of glue into a bowl. Stir to remove any lumps. Add shampoo. Stir as well.
- And then there is starch, then send body cream here. After each component, the mass must be mixed. The same goes for soda.
- Now enter the Teymurov spray. There are substances that will give the mass of thickness and at the same time soften the skin, since there is castor oil and glycerin.
- This spray is sold in a spray bottle, press three or four times on the spray head. Stir the mass. If the slime has thickened, then you do not need to spray any more. If not, add more.
- See if this mass is too liquid, if so, then first add a little more glue, then spray and mix. Stir the mixture when finished.
Fluffy slime from purchased slimes
If you bought slimes, have already had enough fun with them and want something new, then we suggest modifying them.
- Put the slimes together and start kneading them. When this stage of work is completed, then squeeze out a small amount of toothpaste here and mix the mass until the paste is completely dissolved. Only then add a new portion of this product. Thus, you put the required amount of paste here so that the future fluffy slime begins to acquire the desired consistency.
- Shaving foam will help to make it more airy. Enter it, knead it thoroughly again. If you need more of this substance, add it.
- Hand cream will help to make this mass more elastic. Add its substance, mix thoroughly again. If the fluffy slime made from toothpaste and slimes is not dense enough, then place it in the refrigerator for several hours. After this time, take out the toy and knead it with your hands.
You can make a fluffy slime consisting of several colors. Having chosen the desired recipe for yourself, divide the resulting mass, for example, into four parts. Add food coloring of a certain color to each. Knead the mass. Then you will need to divide it into bundles and twist them. It will turn out to be an interesting spectacular slime.
You will learn how to make a very airy and crunchy slime in the plot.
