Step-by-step master classes with photos will tell in detail how to make a slime from plasticine. Then you can create an elastic mass from light, ball, floating or ordinary plasticine.
Slime recipes are very varied. Choose for yourself one for which there are ingredients. You can also take those components that suit you. Plasticine is very affordable. It is easy to sculpt from this mass and there are many colors, so you can make slimes of various colors. By mixing several shades, you will get a unique color. See how to make clay slime. Several recipes are presented below.
Ingredients for making plasticine slime
First, familiarize yourself with what you will need to prepare before work:
- Of course, first of all, this is plasticine. Now you can buy so many different companies. Subject to all proportions, even the cheapest plasticine will help make an excellent slime. You can fantasize, at the final stage, add a few circles of a different shade to the main color to make a slime interspersed. It's also fun to roll up some hand gum sausages, then put them together and experiment. You can twist or continue kneading the slime. Then you will get interesting shades.
- Speaking about how to make a slime from plasticine, it should be noted that water will be needed. But this natural element is available everywhere.
- Gelatin is often used to make slimes. You can also buy an inexpensive version of gelatin available at all grocery stores.
- A metal container is required for heating. But you can also use special utensils for the microwave to melt the ingredients here. Please note that the container must be specifically for technical purposes, since then it is unacceptable to use it for food.
- To store the finished product, you will need a plastic container. For example, you can take a plastic cup or other similar dish.
These are the components required. Now see how to make plasticine slime using various recipes.
How to make a slime from plasticine with your own hands: a recipe with gelatin
Take:
- 100 g of plasticine;
- 15 g gelatin;
- 200 g of water;
- suitable dishes.
Pour the gelatin into a suitable container and fill it with the above amount of water. Leave it on for 40-60 minutes to swell according to the instructions. When doing this, use water at room temperature.
When the gelatin swells, put it in a metal container over a fire and start melting, stirring occasionally. When the crystals dissolve, but the gelatin has not yet begun to boil, remove it from the heat.
Let it cool, until you knead the clay to make it softer. By this time, the gelatin has cooled down, then pour it into the plasticine and knead the mass. Then you will need to let it freeze in the refrigerator for an hour.
When you want to play with the slime, take it out, knead it slightly.
Here's how to make a clay slime. But these are far from all the recipes. Pay attention to the following, in which the curing agent is Persil gel. See how to make a slime with plasticine based on it.
How to make plasticine slime with Persil washing gel
Take:
- 50 ml of PVA glue;
- 1-2 tsp Persil;
- ball plasticine;
- hand cream;
- suitable capacity.
Pour the glue into the container, add the cream there and stir.
You will need to pour in Persil. Then the slime should begin to thicken quickly. If it is still insufficient in consistency, then add a second spoonful of this product.
After you've mixed it with a spoon, start doing it with your hands.
To keep the plasticine slime last longer, keep it in a tightly closed plastic container or in a plastic bag in the refrigerator.
How to make a slime from floating plasticine with your own hands?
If you do not know what it is, then check out the characteristics of this material. Such plasticine:
- It does not sink, therefore it is called floating. The bars are lightweight, therefore they do not immerse in liquid.
- It does not stick, which is very valuable for parents, since even pieces that have fallen on the floor or on the carpet will not stain such a coating. And when you show your child how to make slime from plasticine, and then the children start tinkering, they will not stain their clothes.
- Soft. Therefore, it can be kneaded without much effort, unlike ordinary plasticine.
- It will be even more interesting to play with the finished product. After all, you can lower the slime into the water and watch how it swims. Therefore, you can give the slime the shape of, for example, a ship, and play with it that way.
See how to make a slime from light plasticine. Take:
- 50 ml of clear stationery glue;
- a block of floating plasticine;
- 10 drops of naphthyzine;
- a pinch of baking soda;
- suitable capacity.
Mash the floating plasticine with your hands. Then tear into pieces, put in a prepared container. After that, you will need to add glue here and stir the mass with a spatula, fork or spoon.
Add soda, naphthyzine here, mix again. See if the future slime has thickened well. If not, then add a little more naphthyzine and stir. Then take a non-food plastic or wooden board and start kneading the mass with your hands on it.
You can take plasticine of no one color, but, for example, two. You will get a multi-colored slime.
How to make plasticine butter slime?
This kind of hand gum is very delicate and resembles soft butter in consistency. It can be smeared with a knife on the surface, and then reassembled. In this case, such a slime will have a single consistency, it will not leave marks on the surface.
But for this you need to use light plasticine. It has a velvety surface and is easy to knead. Such plasticine is also called airy.
Take:
- light plasticine;
- 1 bottle of shaving foam;
- 50 g starch;
- 50 g baby powder;
- 120 g PVA glue;
- 30 g shampoo;
- 20 g hand cream;
- sodium tetraborate;
- dye if needed.
Manufacturing instruction:
- Pour the glue into a non-food container, add shaving foam here and stir. Then add starch, baby powder and stir again. After that add shampoo, cream, also make the consistency homogeneous.
- Add colorant at this stage if desired.
- Then you need to make the slime thicken. To do this, first pour sodium tetraborate into water, stir. Then gradually start adding this solution to the slime. At the same time, it is convenient to mix with a wooden spatula. When the consistency is satisfied, continue kneading with your hands.
And here is how to make slime from light plasticine according to other recipes.
How to make slime from light plasticine - 3 easy recipes
Take air plasticine, lightly knead it with your hands and add liquid soap, stationery glue here.
The following slime recipe consists of:
- shaving foam;
- air plasticine;
- water.
Mash light plasticine, add water here and stir. After that, send the shaving foam there, mix again.
Here's how to make a slime from light plasticine according to the following recipe. You will need:
- shaving foam;
- air plasticine;
- toothpaste glue;
- shampoo;
- thickener if necessary.
The thickener can be sodium tetraborate, boric acid, or contact lens fluid. But if you use Luch glue, then do not take sodium tetraborate as a thickener, since together these substances will not give the desired effect.
Mix toothpaste with shaving foam, glue and shampoo. Pour this mass into pre-mashed light plasticine. Knead this inedible anti-stress gum with your hands. If you want the slime to be thicker, then add a thickener.
How to make pearl slime - master class
See what kind of unusual slime you get. As you can see, this is a great anti-stress with balls.
To make it, you will also need light plasticine.
Take:
- 50 ml of washing gel;
- 1 bag of light plasticine in the form of small balls;
- 2 tbsp. l. salt;
- 50 ml of PVA glue;
- container and wooden spatula.
Pour laundry gel into a bowl, add salt and mix thoroughly. The gel will thicken before your eyes.
Then remove this mass for 15 minutes in the refrigerator. Get it out after the specified amount of time from there, add here the plasticine that was pre-crushed by your hands. Then pour in the glue and mix the slime thoroughly again.
Ball plasticine is small foam balls held together by a sticky substance. It comes in large and smaller fractions. When you decide how to make a clay slime, choose one that will be comfortable to play with. And if you do not have ball plasticine available, then use foam balls. You can remove them from an unnecessary pear chair, crumble a piece of styrofoam, or buy such a lightweight filler in a store.
You will add these components to the mass that you take out of the refrigerator, then put regular or light plasticine and glue here. Then pour the foam balls there and mix.
How to make plasticine slime - recipe with soda
If it is easier for you to use a regular mass for modeling, then see how you can make a slime from ordinary plasticine by taking it. Use the following components:
- 1 bottle of PVA glue;
- a block of plasticine;
- 5 g of soda;
- 10 ml of water;
- 3 drops of contact lens fluid;
- medical syringe;
- wooden skewer;
- suitable capacity.
Watch a master class with step-by-step photos that will teach you how to make a slime from plasticine.
- First, take the prepared block. You can use two halves of different colors. Tear this sculpting mass into pieces and place them in a suitable container with high sides.
- Then add glue here and stir. After that, you will need to drip contact lens solution and continue to knead.
- Take another bowl, add soda and water here. In order for this liquid to be exactly the amount that is needed, you will need a medical syringe without a needle. Stir it with baking soda and add to the mass obtained earlier.
- Stir it all with a wooden stick, then mix the composition with your hands, when the plasticine slime stops sticking to your palms, you can play with it.
If over time the slime began to harden, then drop water on it and remember. But in general, you need to store plasticine slime in a plastic container under a lid, then it will not lose its necessary qualities for a long time.
You have learned how to make a slime from light plasticine, from floating, from ball and from ordinary. You can use the materials that are easiest for you to work with, and they are available. And you can see how to make a slime from plasticine if you use the mouse arrow to click on the playback of the next video.
From the video you will learn how to make slime from light plasticine without glue. And in addition to light plasticine, you only need shaving foam, shampoo and water. This slime butter is very pleasant to the touch and turns out to be delicate and airy.
