Paper flowers for the hall can be made from paper bags using a figured hole punch. Check out how to make corrugated paper growth flowers to create a giant bouquet.
Our paper craft material will teach you how to create extraordinarily beautiful flowers from this affordable material.
Flowers from white paper for the hall - master class and photo
You will decorate the front part of the house with such masterpieces, and it is not at all difficult to create them. All you need is:
- a piece of white paper;
- scissors.
Follow the step by step instructions:
- First, you will need to cut the sheet so that it turns from a rectangle to a square. Now fold the resulting shape diagonally once, then fold it in half again to form a small triangle.
- Remember where the center corner is, as you need to fold the triangle again to make it even narrower. In this case, the central angle folded in half, and the two opposite ones will be attracted to each other.
- Now give this blank a rounded shape. On the other hand, you need to cut so that you get 2 parallel semicircular lines.
- Then, for this paper craft, you need to do this. Expand the workpiece, you have 4 symmetrical petals. Each has an oval insert inside.
- Lift it up and pull it towards the middle. Do this with all four petals. Glue them in the center, you can attach trip or glitter here.
How to make paper flowers for a hall of this type, shows a master class with step by step photos.
You can create two similar plants and then glue one flower onto the other. In this case, the lower petals will be located between the upper ones.
Such paper flowers can be used as voluminous snowflakes and decorate the room with them for the New Year. Then the following idea comes in handy.
- Take a rectangular piece of paper, fold it diagonally, cut off the excess to make a square.
- Now fold it diagonally and cut into strips that run parallel to the sides. In this case, you need to cut from the bottom up, but do not cut a little to the top.
- Then unfold the blank and start the creative process. First, bring the two opposite ends of the inner square together and glue like this. Now do the same with the next square, positioning it above this one. Then turn the blank over and shape the other petals. You will end up with a lush snowflake or paper flower.
- Make several of these blanks, and then glue them. You can use white or colored paper.
The next flower for the hall turns out to be no less lush. Take:
- colored paper;
- scissors;
- glue.
Follow the instructions below:
- Cut out circles to be the same size. Place one in the center. To make the work more durable, it is better to glue exactly the same on the back.
- Now, from the rest of the circles, make small bags by gluing their edges. Then you will need to glue these blanks on a circle on the central circle, placing them symmetrically.
- You will get a wonderful paper flower for the hall. It can also be used to decorate a postcard for any holiday and as a souvenir.
Flowers for decorating a hall made of paper and bags with your own hands
By the way, wonderful flowers are obtained from such blanks, look at which ones. Take:
- paper of various colors;
- cardboard;
- scissors;
- glue.
To make paper flowers to decorate the hall, you will need to cut paper squares of different colors. But first you need to cut the cardboard base in the form of a circle. If its diameter is 13 cm, then for the first row you will need squares: 24, for the second 22, for the third 17, for the fourth 12, and for the middle of the plant 15 pieces.
Make a small bag out of each square, glue the free sides to fix the blanks. Place the first row of these circles outside the cardboard circle.
Then attach subsequent rows.
It remains to glue the bags in the middle.
To make such flowers out of paper on the wall, you need to leave a kind of tail on the cardboard in advance, so that you can then make a hole in it. Then you attach the workpiece vertically.
You can also make a sunflower out of paper by creating it from bags.
Take:
- yellow paper;
- scissors;
- foam ball;
- green threads;
- brown paint;
- brush;
- glue;
- stationery knife.
Step-by-step algorithm of actions:
- From one ball, you can make a core for two flowers. Cut this blank in half with a clerical knife. Paint it brown.
- Cut squares out of yellow paper, form from each bun and glue the free edges. Glue these blanks on a half of a Styrofoam ball along the edge in one or two rows. Leave the middle free.
- Pierce the back of the foam ball with a branch, but not completely. Glue the tip here. Wind green threads on this blank, gluing their turns. Make leaves out of green paper, glue them on the trunk of a sunflower.
Flowers from paper bags turn out to be very similar to real ones. The next one looks very much like a dahlia. The petal diagram next to it will help you make a paper flower. Cut it out so it is shaped like this. Also make a bag. But you are already using not a square, but this petal shape. Make a few pieces and glue them in the center. Cut narrow strips of paper of the same color, fold each in half, but do not bend the middle. Glue the stamens in the middle of the petal, and fasten very small similar elements in the center.
Paper flowers created from two contrasting blanks look beautiful. Cut a petal out of white paper. Glue its bottom edges to make a bag. Cut a smaller petal out of black paper and glue it into the formed pile. Thus, arrange six more petals and glue them together.
See how to make paper flowers for hall decoration so that they are contrasting.
Make small white pouches and glue them on a blank of black paper. For a large flower, cut out several identical blanks of black and white paper, but in different sizes. Collect the flower. Place a small white paper rose in the center. Other contrasting flowers are created in the same way.
Read also about making a modular origami lotus
Openwork flowers for decorating the hall with your own hands
If you have an openwork hole punch, then making the next plant will be easy.
Cut out six large and 6 small petals. Decorate their edges with a hole punch. If you do not have this tool, then draw a pencil drawing on the edge of the petal, then cut with a clerical knife. Then you can use this template for other petals. Attach it to the next piece, also decorate it with a small clerical knife.
If such a master class seems difficult to you, then try to make openwork flowers with a simpler pattern. See how to style the edges of the petals.
You should have six large and 6 small blanks. Glue them in the center, and attach a small flower and a bead in the middle.
See what other openwork paper flowers can be. These petals are like crowns. Make their edges openwork with a small, sharp knife.
You can make all the petals openwork, then fasten them in the center and attach a paper rose here.
And here's how to make a flower for decorating a hall from a paper strip. Cut it off, fold it in half. Now on one side, where the fold is, cut into strips. Start twisting the plant by gluing its branches from below. Then glue the green paper here.
Also cut out the petals for the next flower with the thin blade of a utility knife.
Make three layers of similar blanks, connect them in the center. Here's how to make a different type of fishnet flower.
Take:
- colored paper;
- scissors;
- glue.
Place a rectangular piece of colored paper in front of you, fold it in half. Starting from the fold, cut into thin strips, moving in the opposite direction. In this case, the scissors should not reach the edge of about 2 cm. Make the fold more lush. Turn the rectangle into a circle by joining opposite edges and gluing them. You can make a core from the same blank, but you will need to twist it. How such a flower is created is shown by the following MK and step-by-step photos.
Take:
- paper of different colors;
- simple pencil;
- scissors;
- hot glue gun;
- ruler.
Place a piece of pink paper in front of you. Cut out a shape from it, as in the photo. When applying a ruler here, use it to bend the workpiece to create such folds.
In the same way, you need to make other petals so that you have 7 pieces. 4 will be at the bottom and 3 at the top. Glue these blanks, attach the stamens in the middle. To make them, cut out of yellow and black paper in a circle, cut their edges into narrow strips. Using scissors, make the edges so that they rise up.
Glue the black blank on the yellow one and attach the middle to the center of the flower. Fold a sheet of green paper in half and cut out a leaf. Make 3 or five of these blanks, glue them on the back of the flower.
You can do ranunculus. Take a piece of paper, cut it in a spiral with wavy lines. When this work is completed, begin to twist the resulting tape, gluing the layers from below. If desired, then attach these plants to a reinforced plastic pipe. It can be pre-painted or wrapped with green tape. Cut leaves out of paper and glue them on the trunk.
Such a rose is also created using a metal-plastic tube, which will simultaneously serve as a stem.
When you start thinking about how to make a growth flower out of paper so that it is stable, use, for example, a plastic cup for this. You need to put cement mortar in it, put on a stem from a wire frame on top.
Hide these blanks by wrapping them in green corrugated paper.
Instead of a glass, you can use a plastic bottle or flower pot filled with plaster or alabaster solution.
See how to make a flower to decorate a hall or one that will become an original hat.
Take:
- sheets of corrugated paper 25 cm wide;
- scissors;
- floristic wire or thread;
- glue.
Stack the corrugated paper and trim the edges. Now roll them up with an accordion, round the corners of the resulting workpiece. Then tie it in the middle with floral wire or thread.
Now disassemble this accordion, give it the shape of a flower. Make two more such blanks, tie them inside by wire or by the threads that are on the blanks.
Cut the leaves out of green paper, glue them on the back.
If it will be a flower on the head, then tie or glue it to the hoop.
If you want to make growth flowers from corrugated paper with a core, then take a look at this fascinating master class with step-by-step photos.
As you can see, you need to put blanks of the same color on top of each other, then roll up with an accordion and round the edges. Also fold a small piece of yellow paper, but cut the right and left edges with a fringe. Put this blank on the pink one and fold these two materials together with an accordion so that the yellow is inside. Tie the middle with a thread, then straighten this blank, give it the shape of a flower. You can also make such a plant using corrugated paper.
Multi-color masterpieces can be created. To do this, also cut rectangles from corrugated paper, roll them up with an accordion from round the edges. Place the blanks one above the other so that they are large at the bottom and small at the top. Then tie these elements in the middle and give them a rounded shape.
And here's how to make growth flowers from corrugated paper for decorating a hall or other room. These will consist of individual petals.
Cut out petals of the same size from corrugated paper using the template. Now you need to start twisting them on the side on a wooden skewer. Then stretch these blanks slightly in the middle to shape them. Now you can tie some petals to make a flower.
In the same technique, you can make a carnival flower costume. In this case, the plant itself will be on the head, and the face remains free. Put on a green dress and other wardrobe items of this color to turn into a flower for a while.
DIY corrugated paper growth flowers will become wonderful interior decoration items. You can collect them with string or fishing line and attach to the wall.
If you wish, attach the flowered threads to the ceiling. But they should be so long that they don't hit your head.
In this case, it is better to attach the flowers directly to the ceiling. But just make sure that the paper does not touch the bulbs to avoid fire.
You can use metal or plastic netting to attach a flower garland here. Then you can also decorate the hall with them.
Such growth paper flowers will decorate the venue for a wedding or other celebration.
Such elements will be appropriate in the photo zone, such photographs are taken as a keepsake during the wedding celebration.
Now you can make such paper flowers. The following video will also help you with this. Pay attention to how to make growth flowers from corrugated paper.
You can make a large peony out of corrugated paper if you watch the following plot.
You will also be able to create flowers from paper using the origami technique if you include a second video.
