See how to make clothes for a Paola Reina doll - how to sew a coat, national costumes, tights, shoes, a casual and festive dress with a bolero.
Try making clothes for the doll. Thus, please your beloved daughter, relative, or then present such a set to a girl you know.
How to sew a dress and bolero for a Paola Reina doll?
If you have a Paola Reina doll, then we suggest making a bolero and an evening dress for her. If your daughter can, she will help in this needlework, thereby you will begin to accustom her to tailoring and, most likely, she will like it.
To get such a beautiful outfit, take:
- tulle;
- mesh;
- scissors;
- pearl thread;
- sewing accessories;
- lace;
- oblique satin ribbon;
- lining fabric;
- satin fabric.
In this case, the outfit was sewn for a Paola Reina doll 30 cm high. Can also be used for Paola Reina 32 cm.
First, you need to redraw the patterns from the monitor screen or print them. You can enlarge to such an extent that they fit exactly your doll.
As you can see, you need to create one front piece, 2 folded back pieces and a sleeve pattern. For the bolero, you will need 2 back parts, two front parts and four for finishing the shelf.
First, we will sew a dress for the doll. Place the patterns on the fabric, circle and cut with a 5mm allowance. To then decorate the dress with lace, attach the front and back details to the lace fabric, outline and cut.
Now attach the shoulder seams to each other, sew them on the hands, and then on the typewriter. To prevent the lace fabric from slipping off the main fabric, first sweep two types of fabric with a basting stitch on your hands.
Also, according to the same pattern, it is necessary to sew the same details for the lining of the dress. Pin the lining fabric to the base fabric at the neckline. Then sew here on the typewriter.
To then carefully turn the dress, you need to make cuts along the edge of the neckline at the seam.
Now sew the lining to the main fabric and at the armhole. Turn the dress inside out and iron the seams. Then sew on the sides as well. To make the dress fit better, you can make two symmetrical cutouts on the back, which are located vertically.
Take a measuring tape and measure the length of the future skirt, in this case, it is 18 cm. To do this, cut out a 125 by 22 cm skirt from tulle. This includes allowances, the skirt will be fluffy and floor-length.
Sew the side of this product, then step back a little from the top, sew on a typewriter on a wide seam and collect the skirt around the waist with thread. To do this, just pull up the ends of the thread, then tie them.
To sew clothes for Paola Reina further, match the top of the dress with a tulle skirt and sew. Do not attach the lining yet.
For now, you only have a top sheer skirt. Now you need to cut out the bottom one from satin measuring 90 by 22 cm, also sew the sidewalls, tuck the bottom of the skirt, sew here. Sew the top with a large seam on a typewriter to then pull on this thread, and the top of the skirt was equal to the doll's waist.
For the skirt to be fluffy and keep its shape, make a petticoat from a rigid mesh. Cut out a blank for a skirt measuring 56 by 17 cm, you still need to cut a flounce 140 by 7 cm. Sew the sides of the skirt, also sew the side of the flounce, sew it on top, gather it on a thread and attach it to the bottom of the skirt.
So that the petticoat of the upper part does not add to the waist of the doll, you do not need to collect it on a thread, but lay the folds here.
Now sew the petticoat to the bodice, it is most convenient to do this on your hands. Grab all layers of the dress in this location.
In order for the dress to be fastened with a button, it is necessary to crochet a loop for it. To do this, pass the hook into the upper part of the dress, make the first loop, tie a column, secure it.
This is how clothes are created for Paola Reina. You need to sew a bolero.
Take a pattern, cut out parts of the front shelf. These are four parts. Two of them are sewn in a mirror image in relation to the other two. Also cut out two backrest pieces.
From the resulting blanks, you will need to sew two boleros. For the first, let's combine the front parts with the back, stitch them on the shoulders and on the sidewalls. Create a second bolero in the same way.
Fold the two pieces together, sew along the edge on the wrong side to join. Turn this vest through the holes in the armhole.
Cut out two sleeves from tulle, stepping back 3 cm from the bottom, collect on a thread. Make the second sleeve in the same way. They will have a kind of fluffy cuffs.
Sew the sleeves into the armhole. Do this with a satin ribbon that will help connect the two.
You can decorate the sleeves with roses. To do this, cut a strip of 11 by 2 cm from tulle, fold in half along the length and twist on one side to make a rose. Sew on the back to fix this flower.
If you have scraps of fabric left over, you can sew a purse. To do this, cut out a 6 by 13 cm rectangle from the canvas, cut out a round bottom, the diameter of which is 3.5 cm. Sew lace details on top of the rectangle. Connect the sides of the bag. Now sew the bottom to it. Turn the bag over to the front, sew a satin ribbon so you can tie and untie this product.
Pearl thread looks very nice, which will become the handle of the bag. You can sew buttons of the same type here on the dress, then everything will be in harmony, and the kit for the doll will turn out to be simply gorgeous.
You can also sew hair ornaments from the remnants of the fabric. To do this, attach a tulle rose, satin petals to a satin ribbon and decorate it all in the center with artificial pearls.
You can sew many more other things for the Paola Reina doll. The following patterns will certainly help you. You will need to print them, transfer them to fabric and create beautiful outfits.
DIY patterns for Paola Reina doll
This Spanish beauty will sport a variety of new clothes if you create them. You can do this with your child to teach your daughter to needlework, and she liked this lesson.
As you can see, to make summer dresses, you need to cut out one piece of the shelf from the main and lining fabric. You will also need only 2 parts of the back, two parts of wide sleeves.
But if you want to quickly sew a dress for the doll, then you can do without the lining fabric. And if you wish, then first cut out the part of the shelf and back from it, then sew these blanks on the sides and shoulders. Likewise, create the top from the main fabric. Cut out two sleeves from the main canvas, gather them on top of a thread and tighten to make a flashlight.
Sew the sleeve into the armhole, sew an openwork tape to its bottom, sew a zigzag elastic band between it and the sleeve on the back side to make beautiful flounces.
For a skirt, cut a 10 x 59 cm rectangle from the main fabric. Gather it on top of the thread, sew to the top of the dress, hem the bottom. Here's a summer dress for a Paola Reina doll.
And if you want to sew a national outfit for her, then pay attention to the following patterns.
Such a national costume is sewn very easily. There is a raglan sleeve. Look, this is a pattern for Paola Reina 32 cm.
- One-piece front. You will need to cut one piece. If you wish, make a two-piece back to attach the buttonhole and buttonhole to the back.
- And if you make the collar wide enough, then you can do without the fastener and make one piece of the back. Also cut out two sleeves.
- If you are sewing a back from 2 pieces, then sew them in the middle, leaving the top edge not sewn. Sew the sides, sew in the sleeves. Now you will need to process the neckline, hem the sleeves and bottom. If you wish, sew on this tape from below.
And here's how to sew a Russian national costume for a doll. A pattern will also help this. Create the front and back of the garment with a vibrant red fabric.
Cut the front and back of the dress from bright red fabric, and the sleeves from white. To make it seem like a sundress and a shirt. This is how people used to go in Russia. In the center of the front, you will sew the braid, and with the other you will decorate the bottom of the product and the middle of the sleeves. You can also make a ribbon from the braid to decorate your hairstyle.
The next one is a sweater pattern. Make this thing out of knitted fabric so that it fits well and can be worn over the doll's head. The pattern assumes a raglan sleeve. Also, first cut out the pattern of the shelf, back and sleeves on paper. Then transfer it to the fabric and cut with seam allowances. You can turn this pattern into a T-shirt, shorten the sleeves. And if you wish, then sew a tulle frill to the top of the neckline, it will turn out even more beautiful.
Another jacket is warmer. She's hooded. On the pattern, these are the smallest details that will help create things according to the size of the doll. One-piece back. Dotted lines indicate fold lines. And the front consists of two parts. The sleeve pattern is also available here. Where there is a dotted line, there will be a fold of the fabric, on which you need to put this half of the sleeve, in order to then cut out the whole one. You will need 2 of these. You will also need to cut out two parts of the hood. As you can see, there is a hole for the hair, as this doll has quite long hair.
The following pattern of clothes for the doll will help to make a flared dress with a small sleeve. Also, according to this pattern, you can create a sundress, for this you will not need to sew on a sleeve. As you can see, the side seams of the front and back are marked with markings. They are needed so that you then connect these parts in the area of the sidewalls. Then sew the shoulder seams. Fold over the straight edge of the sleeve, sew. Do the same with the other sleeve. And where this workpiece is semicircular, it needs to be sewn to the armhole.
If you need to sew a coat for the Paola Reina doll, then the following pattern will help. Here it is shown where you need to sew the piping to the shelf. To do this, you will then attach them, combining the wrong side of the ribbons with the wrong side of the stick and stitch them. But since the back collar goes further, you will need to sew it on the back of the coat to the neckline. On the back, it is drawn where exactly this part is attached. Then you turn the product over your face, iron it out, and you get a collar with a brim. You also need to sew a pocket on this coat. The scale shows how large the parts need to be made.
The tunic pattern shows how to make such clothes for the doll. The tunic will be with a hood to which the ears are sewn. A very original piece. You can make it from thick fabric or from fur.
And to make shoes for a doll, cut two blanks from leather. Then you will need to glue a large blank to this sole. As you can see, the latter consists of several semicircular parts with holes. It is through these holes that you need to thread the cord in order to then connect these parts of the boots at the top. And on both sides you will need to attach two halves of the button in order to then fasten them.
In conclusion, we suggest looking at the coat, which is made of fleece, since it is sleeveless, a long jacket is fitted under it, which you can knit. It remains to complement this outfit with a light scarf to make the doll look fashionable.
Here's how to sew clothes for Paola Reina. Watch the process of creating things for dolls in the following video.
After watching the video, you will learn how to sew a dress for a paola doll.
